Sol Allphin: well you'll need a 10 gauge amp kit that includes; power wire, fuse holder, ground, speaker wire, rca's and remote wire. connect power wire to battery positive terminal with an inline fuse, then make a hole in the firewall big enough for the wire to go through put a groment in the hole then run the wire in the care under the drivers side, then connect remote wire to either the remote wire coming from the radio or a switch, connect rca's behind the radio (if your using a factory radio you'll need a line output converter to run rca's and remote wire) then strip some paint in the trunk to bear metal and ground it very securly i usually drive a self tapping screw through the ground wire terminal then 2 self tappers on both sides of the terminal to keep it in place and from moving. since your running such low power you can route the wires to the back on the same side of the car drivers side would be ideal.any more questions just shoot me an email...Show more
No comments:
Post a Comment